On Friday, December 17, 2010 12:03:23 pm Jason Gurtz wrote: > All the Cisco Documentation seem to assume that the ATM interface will be > used for VDSL or PPPoA. PPPoE is shown running over Eth0 and we'd like to > ditch the ATT provided "modem" device. > > Is there any IOS 15 examples out there for running the PPPoE dialer over > ATM0.1 in on this device? > > ~JasonG > Here is a config from my 3725 router at home on Belsouth (AT&T).
interface ATM0/0 no ip address no atm ilmi-keepalive dsl operating-mode auto dsl enable-training-log dsl lom 7 ! interface ATM0/0.1 point-to-point no ip redirects pvc 8/35 encapsulation aal5snap protocol ppp dialer dialer pool-member 1 ! ! interface Dialer0 ip address negotiated ip mtu 1470 ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname LOGIN ppp chap password 0 PASSWORD ! ip nat inside source list 1 interface Dialer0 overload ! logging history debugging access-list 1 permit network block --- Brian Raaen Network Architech _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
