> This requires pppoeoa support / configuration on BRAS. You can > configure pppoeoa on CPE but it will not negotiate as ser ver will be > expecting PPPoA encap and you are sending PPPoE.
Thank you Vikas and Brian, I'm pretty sure the BRAS is set up in this way as other operational dsl configs we have with ATT are very similar to what Brian showed. The difference in this case is the location is on one of the "extended dslam" devices. We are looking at a L1 issue as I went onsite myself and observed CD light is transitioning from slow blink-> fast blink -> solid on -> off. Can't trust the ATT folks as they were even unable to provide correct VPI/VCI numbers (had to figure out via the ATT equipment). ~JasonG _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
