I've got a situation where a customer is having to relocate from one facility to another a few miles away. This customer has a 100Mb metro ethernet connection at the old location, and can't get it moved for several months.
To help them out, we're trying to setup a pair of 3620's that we had with wic-1dsu-t1's (4 ea router) to bridge the metro e across a multilink ppp group and back to an ethernet connection at the new site. For some reason, I can't get this to work. Here's the config I'm using on each side- bridge irb bridge 1 protocol ieee int serial 0/0 encaps ppp multilink-group 1 int serial 0/1 encaps ppp multilink-group 1 int serial 1/0 encaps ppp multilink-group 1 int serial 1/1 encaps ppp multilink-group 1 int multilink 1 encaps ppp bridge-group 1 int fa0/0 bridge-group 1 So I figure I'm either missing something simple, or something major, like it's just not possible with this hardware. Either way, I'd appreciate whatever thoughts anyone has. Thanks- Joe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
