can it handle full BGP table ?
> Date: Wed, 12 Jan 2011 13:19:06 +0100 > From: ma...@linuxgoeroe.dhs.org > To: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] BGP Router > > On Wed, 12 Jan 2011 23:04:28 +1100, Reuben Farrelly > <reuben-cisco-...@reub.net> wrote: > > > Yes this switch is fine for running BGP with the caveat that you won't > > be able to take a full BGP table on this hardware. I believe the > > hardware TCAM is limited to about 250,000 routes. > > Yep. The ME6500 is pretty much a fixed-config SUP32. > > Regards, > > Marco. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/