Agreed would need some platform details but, in general, if you are seeing port get to 92% then you can be pretty much sure that you are bursting to 100% and dropping at times.
-Ben On Jan 14, 2011, at 11:12 AM, Phil Mayers wrote: > On 14/01/11 16:08, Dan Letkeman wrote: >> Hello, >> >> I'm seeing many of our etherchannel's on different switches having output >> drops: > > Platform? IOS version? Config of the interface(s) (routed, SVI, etc.) > >> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 898085 > > Are you monitoring the traffic rate? Do the drops correspond to traffic > bursts? Do you have QoS enabled? > >> I also see that it usually uses one port of the etherchannel to a high >> degree, say 92% before it seems to push data through the other >> connection. > > That's not necessarily unusual, depending on your etherchannel load balancing > algorithm and traffic patterns. But you haven't really supplied enough info > for people to help you. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
