Really bad idea.. if you had 2 connection through a single switch, makes sure it your switch or managed by you. Or else, use L3 solutions.
Thanks, Insan ----- Original Message ---- From: Jay Nakamura <[email protected]> To: cisco-nsp <[email protected]> Sent: Wed, January 19, 2011 3:07:17 AM Subject: [c-nsp] STP and customer ports Is there any good reason to turn on STP on a switch port to a customer? It seems like it could cause more trouble than preventing a loop. What's your common practice? What if you hand off two connection for redundancy? I am in the middle of converting to MSTP from a network that didn't really have any STP design or goals. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
