Hi Farooq
Trying changing fiber cable. This error is normally generated when signal
loss level exceeds the operating value For e.g. if point A sends a signal of
2 dbm, when it reaches point B signal is -12.5dBm("show interface tengig0/x
trans detail" output will give you details) i.e. loss of 10.5 dbm. Warning
threshold value in this case is -9.9 dBm and Operating threshold would be
around -13dBm. If this signal is less then -13dBm, Tengig port would go into
errdisabled mode(if error recovery is not configured). Signal loss needs to
be controlled here.
Hope it helps
Regards
Jawwad Paracha
IBM
On Mon, Jan 24, 2011 at 3:03 PM, Farooq Razzaque <[email protected]>wrote:
> yes correct. This link is connected between core and Distribution switch.
>
> <http://www.flamingtext.com/hmail.html>
>
>
>
>
>
>
> > Subject: Re: [c-nsp] %SFF8472-5-THRESHOLD_VIOLATION: Te0/2: Rx power low
> warning; Operating value: -12.5 dBm, Threshold value -9.9 dBm
> > From: [email protected]
> > Date: Mon, 24 Jan 2011 09:52:58 +0000
> > CC: [email protected]; [email protected]
> > To: [email protected]
>
> >
> > I am going to take a guess in that he will not be using fibre from a
> service provider.
> >
> > He states that the issue is on a fibre link between a core switch and
> this 3560...
> >
> >
> > On 24 Jan 2011, at 08:09, Muhammad Jawwad Paracha wrote:
> >
> > > Hi Farooq
> > >
> > > I have gone through similar problem with one of our customer in recent
> days.
> > > This issue is related to fiber service provider, get OTDR report from
> > > service provider also attach "show interface tengig0/x trans detail"
> output
> > > from both device.
> > >
> > > Regards
> > >
> > > Jawwad Paracha
> > >
> > > IBM
> > >
> > > On Mon, Jan 24, 2011 at 12:41 PM, Farooq Razzaque <
> [email protected]>wrote:
> > >
> > >>
> > >> Hi All
> > >>
> > >> I am receiving the following errors on aggregation switch
> > >> (WS-C3560E-12SD-E) which is connected with Core switch (Cat. 6513)
> > >>
> > >> %SFF8472-5-THRESHOLD_VIOLATION: Te0/2: Rx power low warning; Operating
> > >> value: -12.5 dBm, Threshold value -9.9 dBm
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> cisco-nsp mailing list [email protected]
> > >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> > >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >>
> > > _______________________________________________
> > > cisco-nsp mailing list [email protected]
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
