Hi Deric, I'm assuming you have a ASA-5510. Initially, all the interfaces on the ASA-5510s were limited to 100M. Later, E0 and E1 were given the capability to run at 1 Gbps. However, this required that the following 2 conditions be met:
1) The ASA must be running 7.2(3), 8.0(3) or higher 2) The ASA must have a Security Plus license installed (as indicated by the 'show version' output). Hope it helps, David. Deric Kwok wrote: > Hi > > I am new in cisco product > > I brought new ASA551 from reseller in Asia but not my country > Now we discover that the product is not same as we saw in the reseller website > In the web, the product includes 2FE and 3 x 100M but now it is all 100M > > The reseller claims the version and the serial no. should includes 2GigE > but we can get ios to sh int as Ethernet (100M) NOT any GE > Try to configure int and it only shows 10M / 100M and auto selection too > > The box is also showing S EC-BUN-K9. > > 1/ How can we get cisco to help? > 2/ I register to cisco website. I am in guess account. Can I get support? > 3/ ls cisco shipping the wrong box? > 4/ ls reseller correct? Serial no. can prove the product. How can we > check with cisco? > > Thank you for your help > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
