Hi, I have an issue in which when a new FWSM is inserted into one of our 6500s the internal Port-channel is immediately put into the admin down status.
It is a 6509-E chassis running 12.2(18)SXF4 and the FWSM is running 3.1(3) in slot 3. We have two other FWSM in slot 4 and 6 respectively, running fine. We have other 6500s running SXF4 with a FWSM in slot 3 so I don't think it is a placement issue. Even if I boot into the maintenance partition it still immediately shuts down the etherchannel. I am sure I am missing something really basic, but any pointers would be appreciated! Thanks Andy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
