And L2TPv3 is supported. Recent code doesn't allow a bridge-group to be defined on a tunnel.
David -- http://dcp.dcptech.com > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Ian Henderson > Sent: Thursday, January 27, 2011 8:37 PM > To: Roger Wiklund > Cc: Cisco-nsp > Subject: Re: [c-nsp] L2 Ethernet bridging over GRE issues > > On 28/01/2011, at 5:17 AM, Roger Wiklund wrote: > > > I've setup a GRE tunnel from Router A to Router B. > > I've configured bridging between Tunnel0 and LAN interface on Router > A > > and Router B > > While this is possible, its ten times easier and more reliable to use > L2TPv3. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
