> Do you have any nice sample config of back-to-back L2TP on Ethernet > with and without VLANs.
Nevermind, I got it working. Sample config is someone else is interrested: Router A: pseudowire-class test encapsulation l2tpv3 protocol none ip local interface Loopback0 ! interface Loopback0 ip address 1.1.1.1 255.255.255.255 ! interface FastEthernet0/1 description LAN no ip address speed 100 full-duplex xconnect 2.2.2.2 1 encapsulation l2tpv3 manual pw-class test l2tp id 1 2 Router B: pseudowire-class test encapsulation l2tpv3 protocol none ip local interface Loopback0 ! interface Loopback0 ip address 2.2.2.2 255.255.255.255 !interface FastEthernet0/1 no ip address duplex auto speed auto xconnect 1.1.1.1 1 encapsulation l2tpv3 manual pw-class test l2tp id 2 1 Works like a charm. But only layer 2. As I cannot put an IP LAN interface, no usable default gateway for HOST A and B. It seems like you have to create 2 subinterfaces with the same VLAN ID. And then put the IP on the first sub-if, and the xconnection on the second subinterface without the IP, and then connected them to the switch as a trunk. /Roger _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
