On Feb 20, 2011, at 1:54 PM, Chris Evans wrote: > Try pinging with a larger mtu? Rule that out first I would say. >
Thanks for the tip, but the MTU does not seem to be an issue. I can ping end2end with an IP packet size of 1492... 7200a#ping vrf vpn-customer Protocol [ip]: Target IP address: Y.206 Repeat count [5]: Datagram size [100]: 1496 Timeout in seconds [2]: Extended commands [n]: y Source address or interface: Type of service [0]: Set DF bit in IP header? [no]: y Validate reply data? [no]: Data pattern [0xABCD]: Loose, Strict, Record, Timestamp, Verbose[none]: Sweep range of sizes [n]: Type escape sequence to abort. Sending 5, 1496-byte ICMP Echos to Y.206, timeout is 2 seconds: Packet sent with the DF bit set !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 292/292/292 ms Also the BGP session is rock-solid. Regards Rutger _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
