Here is the further information that you have requested. I am using iperf unix client/server to test my speed. I have the same 45M limit if I try a bit torrent. I have a cisco 7200 router that is connected via a mvp copper to fiber converter. The t3s are bonded with an anda 2200. I have unbonded both t3s and they both get 45M over each circuit.
On Wed, Feb 23, 2011 at 19:40, Lawrence <[email protected]> wrote: > I have a bonded T3 that I have never been able to get over 45mbs. I > have been on the phone with my ISP and they are able to verify that > both circuits work and they feel bonded circuits are working fine and > that any problem is on "my side" Does anybody know what could cause a > bonded T3 not to be able to deliver bandwith over 45 mbs? > > o I am testing this circuit with a udp client/server transfer program > with the server on an att circuit that can more than handle 100 mbs. > > o I have tied to hit the bonded t3 with muliple isps just incase it is > an isp to isp thing. The t3's never go over 45 mbs. > > o I have run mutiple "speed test.net" benchmarks and that never show > any speed faster that 45mbs (They work with my att circuit when leads > me to belive that that are semi reliable) > > > Any help is appreciated! > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
