sorry Farhan, My mistake. I overlook one interface and again missed to update the list.
Regards, Vikas On Fri, Feb 25, 2011 at 10:54 AM, Farhan Jaffer <[email protected]> wrote: > Hi, > > I have tried the same configuration & it is working... > > (config)#show > Fri Feb 25 10:19:56.980 PST > Building configuration... > ! > class-map match-any Premium-From-PE_CORE > match dscp default cs1 > end-class-map > ! > class-map match-any Business1-From-PE-CORE > match dscp default cs1 > end-class-map > > ! > policy-map CR_QOS_FROM_PE-CORE > class Premium-From-PE_CORE > set qos-group 5 > ! > class Business1-From-PE-CORE > set qos-group 3 > ! > class class-default > ! > end-policy-map > ! > end > (config)#commit > (config)# > (config)# > (config)# > (config)# > (config)#policy-map CR_QOS_FROM_PE-CORE > (config-pmap)#class Premium-From-PE_CORE > (config-pmap-c)#set qos-group 4 > (config-pmap-c)#exit > (config-pmap)#exit > (config)#commit > (config)# > (config)# > (config)# > > -FJ > > On Wed, Feb 23, 2011 at 3:22 PM, Vikas Sharma <[email protected]>wrote: > >> Hi Farhan, >> >> All other policies I am able to modify except this. Also this is the only >> policy with qos-group (for incoming packets) >> >> policy-map CR_QOS_FROM_PE-CORE >> class Premium-From-PE_CORE >> set qos-group 5 >> ! >> class Business1-From-PE-CORE >> set qos-group 3 >> ! >> class Business2-From-PE-CORE >> set qos-group 2 >> ! >> class Business3-From-PE-CORE >> set qos-group 1 >> ! >> class Routing-Management-From-PE-CORE >> set qos-group 6 >> ! >> class Default-From-PE-CORE >> set qos-group 0 >> ! >> class Multicast-From-PE-CORE >> set qos-group 4 >> ! >> class class-default >> ! >> end-policy-map >> Regards, >> Vikas >> >> On Wed, Feb 23, 2011 at 3:19 PM, Farhan Jaffer <[email protected]>wrote: >> >>> Can you please confirm the modified configuration / new class-map? We >>> are running same version on CRS-1s with no. of policies & modification on >>> need basis. This should not be the case... >>> >>> -FJ >>> >>> On Wed, Feb 23, 2011 at 1:14 PM, Vikas Sharma >>> <[email protected]>wrote: >>> >>>> Hi, >>>> >>>> I have a policy which I can see currently not applied on any interface, >>>> I >>>> am trying to modify the policy (remove existing class-map and add new >>>> class-map), but when I commit I see following message "!!% Policy >>>> manager >>>> does not support this feature: Platform does not support policy-map >>>> modification type "qos" >>>> >>>> I am sure this policy is not anywhere attached as otherwise I would see >>>> following error "!!% Object is in use: Class-map "Default-From-PE-CORE" >>>> of >>>> >>>> type "qos" is used bypolicy-map(s). Delete failed" >>>> >>>> This is on CRS1 XR rel 3.6.2 >>>> >>>> am I missing something? >>>> >>>> Regards, >>>> Vikas >>>> _______________________________________________ >>>> cisco-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>>> >>> >>> >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
