If you are using GRE look into using keepalives. http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080 48cffc.shtml
Cheers, -Aaron -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Righa Shake Sent: Monday, 28 February 2011 2:41 PM To: [email protected] Subject: [c-nsp] Tunnel Up and Down State Hi, Am having a problem where by my tunnel state is still up even though the end point is down. How do i set the tunnel such that when the end point is down then the tunnel state is also down. Regards, Righa _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
