Hello Renelson,
Try this config, obviously use whatever fex#, ethernet ports, and
port-channel numbers you wish:
interface Ethernet1/32
switchport mode fex-fabric
fex associate 130
channel-group 30
esc-n5548-1# sh run int po 30
interface port-channel30
switchport mode fex-fabric
fex associate 130
sh fex 130
FEX: 130 Description: FEX0130 state: Online
FEX version: 5.0(3)N1(1a) [Switch version: 5.0(3)N1(1a)]
Extender Model: N2K-C2248TP-1GE, Extender Serial: JAF1416CSEH
Part No: 73-12748-05
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/32
Fabric interface state:
Po30 - Interface Up. State: Active
Eth1/32 - Interface Up. State: Active
At the bottom of "show fex nnn detail" is a log showing what the fabric
extender is doing.
Regards,
John Gill
cisco
On 6/2/11 3:21 PM, Chris Evans wrote:
Post your configuration. We've rolled quite a few of them.
On Jun 2, 2011 2:53 PM, "Renelson Panosky"<[email protected]> wrote:
Have anybody here is running Cisco Nexus 5548P with 2248TP. I configured
everything but i still can't see the Cisco Nexus 2248TP. Can anyone help
me
with this ?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
