Configuration would be a good starting point? I am assuming you have checked all the basic things; Plugged in and powered on? Cabled correctly (Multi or single mode cables)? Interface show fex or optic?
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Renelson Panosky Sent: Friday, 3 June 2011 4:52 AM To: [email protected] Subject: [c-nsp] CIsco 5548P with 2248TP Have anybody here is running Cisco Nexus 5548P with 2248TP. I configured everything but i still can't see the Cisco Nexus 2248TP. Can anyone help me with this ? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Like us on Facebook at http://www.facebook.com/racqofficial Follow us on Twitter at http://twitter.com/RACQOfficial Hot foot it to RACQ MotorFest at Eagle Farm Racecourse on 17 July and swoon over Queensland’s largest display of collectable vehicles. Visit www.racq.com/motorfest Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
