On 06/08/2011 09:26 AM, alex nyagah wrote:
I am using cacti for graphing my nodes on the interface and I have two
graphs polling on the same interface but the graphs are different, what
could be causing that
This isn't really a Cisco question.. best asked on a Cacti forum. But:
One graph reading 32-bit counters, and one graph reading 64-bit
counters. This is common and annoying in Cacti.
The first will never read >100mbit/sec. The second will read correctly,
so if you're doing >100mbit/sec they'll look different.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
