Hi all, I have some services from a carrier that are being hand off as a PVC with routed bridge encapsulation - RBE (via an STM-1).
This is connected to a 7609 with SIP-400 & SPA-4XOC3-ATM, running 12.2(33)SRD4. It would appear that the command "atm route-bridge ip" is only supported on ATM cards in the SIP-200 (I have no idea WHY this limitation !). I definitely require RBE to terminate the service as I have tried it on an old 7204 and it worked fine with "atm route-bridge ip" enabled on the interface. Does anyone have suggestions or workarounds to get this working on the hardware I currently have in the 7609 ? Thanks, Tony. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
