On Sun, 17 Jul 2011, Justin M. Streiner wrote:
When upgrading to 12.2(33)SXI6, the switch appears to reject the interface configurations for the gig-e inerfaces that are used for port-channels to the WiSM, and the switch will still reject those interface configurations if you try to re-add them manually.
I found the problem. The config syntax for setting up communication between the supervisor and the WiSM changed (as far as I can tell) starting in 12.2SXF, and the old method of configuring the logical interfaces on the WiSM as trunks/port-channels was no longer supported. I didn't see anything in the release notes about those commands being deprecated.
Once I got pointed in the right direction for the new syntax, everything cleared up. I can post the new syntax later if anyone wants it. Too tired right now...
jms _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
