Hi, > Has anyone run into odd issues getting WiSM blades running in a 6500 when > upgrading to a 12.2SXI image (specifically, 12.2(33)SXI6)? > > I just tried a code upgrade on a 6509 tonight from 12.2(33)SXH5 to > 12.2(33)SXI6, and everything else seemed to work fine, except the WiSM. > > When upgrading to 12.2(33)SXI6, the switch appears to reject the interface > configurations for the gig-e inerfaces that are used for port-channels to > the WiSM, and the switch will still reject those interface configurations > if you try to re-add them manually. > > I didn't see anything really relevant or earth-shattering in the release > notes, but I didn't test ths WiSM funcitonality much beyond the module > powering up, coming up as Ok in the module status and being able to > session into the blade.
wism with SXI all okay here - you need to move to the new WISM control method (wism service-vlan xxx ) - rather than the old manual port-channel configuration method (though I think thats been true for a while) - you may also need to have a particular code-release as minimum on the WISM - we keep ours to latest stuff due to things like 802.11n - 7.0.x.x on ours for a while now alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
