I have very little experience with modular routers, but I I would never thought that there are so much details even for different IOS releases one should pay attention to.. And such hardware compatibility issues. On the other hand, at least they are documented. However, interesting reading.
regards, martin 2011/7/22 chiel <[email protected]>: > On 07/22/2011 11:57 AM, Nick Hilliard wrote: >> The following URL suggests that you can't put a WS-X6816-GBIC in slot 1, >> and that you also need a switch fabric module for it to work at all on a >> 7600. > > Oke, I was beginning to suspect that I had to change it to a different > slot. The following URL says that a switch fabric module is not needed: > "Switch Fabric Modules operate only with a Supervisor Engine 2. They are > not supported with Supervisor Engine 1A or Supervisor Engine 720." > > http://www.cisco.com/en/US/docs/routers/7600/Hardware/Hardware_Guides/7600_Series_Router_Module_Guide/11swfabm.html > > Regarding the IOS 15 and unsupported modules: I have WS-F6K-DFC3A and > according to the link the WS-F6700-DFC3A is unsupported. Correct? > > Any toughts about the WS-X6748-GE-TX in slot 3? It gives the following > message when IOS 15 is booted but will function, as far as I have tested. > 00:03:40: SP: PREDNLD: LC doesn't meet resource requirement for > pre-download, not reserving memory for slot 3 > > Thanks > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
