Yes.
Besides, IPv6 routing works fine and is done in hardware on the same
config with 12.2(55)SE3 with no other changes ("desktop IPv4 and IPv6
routing" template on both).
Reuben
On 28/07/2011 7:10 PM, Michele Bergonzoni wrote:
Il 28/07/2011 9.35, Reuben Farrelly ha scritto:
I've had some quite odd problems with IPv6 with
> 12.2(58)SE1 ... and two exhibited this
problem whereas two others didn't
Maybe trivial, but: did you check the SDM templates?
Regards,
Bergonz
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
