Let's say a router is setup with connection to ISP 1 and ISP 2, which are both non-BGP connection and traffic coming in from ISP 1 can't go out ISP 2 and visa versa. Default route is set on ISP 1, with IP SLA, failover to ISP 2.
I can configure NAT so it will NAT on the correct IP for each egress connection. This is not the issue. Is there a way, for example, a ping to the router coming into ISP2 can be sent back out ISP2 when ISP2 is not the default route? Normal PBR applied to ingress traffic on the interface so I wasn't sure what could be done with traffic originating on the router. Thanks! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
