Hi Andrew, The hold down route did it. Forgot that I had not added it for this block.
Thanks. -Lee On Thu, Jul 28, 2011 at 12:48 PM, Koch, Andrew <[email protected]>wrote: > You will need to get the /32 into BGP first. Then you can let it out the > peering session. > > 1. A matching IGP route must exist. Most networks will use an anchor route > for their aggregate. You can also have a matching IGP route of exact same > prefix length. > router static > address-family ipv6 unicast > 2001:db8::/32 Null0 254 description anchor_route > > 2. Network statement to get route into BGP (unless redistributing IGP route > into BGP) > router bgp 65526 > address-family ipv6 unicast > network 2001:db8::/32 > > 3. Ensure you see your own route in the local BGP table > RP/0/RP1/CPU0:Router#show bgp ipv6 unicast 2001:db8::/32 > BGP routing table entry for 2001:db8::/32 > Versions: > Process bRIB/RIB SendTblVer > Speaker 2 2 > Paths: (1 available, best #1) > Advertised to update-groups (with more than one peer): > 0.3 0.4 > Path #1: Received by speaker 0 > Local > :: from :: (192.0.2.1) > Origin IGP, metric 0, localpref 100, weight 32768, valid, local, best > RP/0/RP1/CPU0:Router# > > > 4. Set some type of route-policy to allow your block out to peers > prefix-set OUT-v6 > 2001:db8::/32 > end-set > > route-policy ALLOW-OUT-v6 > if destination in OUT-v6 then > pass > else > drop > endif > end-policy > > 5. Finally, Set policy to allow prefix out on your session > router bgp 65526 > neighbor 2001:db8:ffff::50 > remote-as 65525 > description My-Peer > address-family ipv6 unicast > route-policy ALLOW-OUT-v6 out > > > > Keep in mind that this is a very simplified example. You should make sure > to take proper precautions when exchanging routes. This includes preventing > martian prefixes from being exchanged, any other type of route tagging, > filtering, max-prefix protections, etc. > > This IOS-XR software installation and configuration guide page should be > kept handy for reference - look for your equipment type, release and general > topic. In this case look for the routing configuration guide. > > http://www.cisco.com/en/US/products/ps5845/products_installation_and_configuration_guides_list.html > > HTH, > Andy > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
