I recently picked up some HWIC-2FE and 1FE cards. For fun I stuck two HWIC-2FE cards and one HWIC-1FE card into a lab 2811. To my surprise, it started up indicating 7 Ethernet interfaces and properly identified all interfaces in the config.
According to Cisco* the maximum supported HWIC-2FE cards for the 2811 is one; I installed two. So what then does "supported" mean? In the past for unsupported WIC/HWIC cards I expected "router will complain about an invalid hardware config", but in this case all the HWIC ports were recognized. ~Seth * http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
