Hi We are adquiring a new WS-C4507R+E chassis and with 2 new supervisor WS-X45-SUP7-E. We are planning to mount 4 WS-X4648-RJ45-E modules in this switch to interconnect most of our network components. There are a pair of ASA55xx that we want to connect via SFP directly in our supervisor card to use those ports and avoid adding a new fiber module in some of the switch slots.
The interconnection will be: ASA_A --> supervisor_1 & ASA_B --> supervisor_2. My doubt is because i believe that in SUP6-E seems one card works online and the other standby. I don't know if in SUP7-E is the same case and I will not have a fully redundant configuration following that interconection scheme, because if ASA-A fails (connected to SUP7E-1) and do the switchover to the SUP-7E-2, this card will be offline and, as a result, the network traffic will not pass. Please share your comments regarding this matter. thanks!! Ramsés _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
