Hello folks,
Need some info on 2 datacenter connected via 10gbps links running OSPF
Area1 and Area 2 respectively.
Summary : 2 sites connected over 10gb, both running Site 1 - OSPF A0 &
Site 2 A1 respectively. want to extend
vmotion vlan from site 1 to site 2.
Requirement : What would be required to achieve vlan stretch ? Except
OTV....
1. as this is layer3 OSPF link - how to enable mpls or eompls
(do i need to run bgp between the links)
2. What other options ? e.g if i use ASR1K ?
Thanks
Rayees
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
