...at L2 no! the BVI itself is l3 so as long as you have your mtu set to the lowest-common-denominator it will work(while your L2 interfaces are set to a higher mtu) >From your email, it appears you are trying to do this *mtu-translation* at >L2-conditionally. That will not work. ./Randy
--- On Sat, 8/13/11, Sridhar Ayengar <[email protected]> wrote: > From: Sridhar Ayengar <[email protected]> > Subject: [c-nsp] BVI MTU Question > To: "Cisco NSPs" <[email protected]> > Date: Saturday, August 13, 2011, 8:15 AM > > Hi. I'm running a bridge group between a Gig E > interface and a Fast E interface. I'd like to use > jumbo frames on the Gig E interface and have it translate > the MTU for packets headed to the Fast E interface, but not > translate the MTU for packets headed to a jumbo-frames > enabled Gig E interface that's not part of the bridge > group. > > Is this doable? > > Peace... Sridhar > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
