Randy wrote:
...at L2 no! the BVI itself is l3 so as long as you have your mtu set to the lowest-common-denominator it will work(while your L2 interfaces are set to a higher mtu) From your email, it appears you are trying to do this *mtu-translation* at L2-conditionally. That will not work.
Hmmm. In the past, when I hooked a Layer 2 switch (such as a C5500) with, say, FDDI and 10BASE-T on it, the switch had no trouble translating the ethernet's 1500-byte MTU to the FDDI's 4470.
Peace... Sridhar _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
