c6513-e behaves same as non-e chassis without sup2t[0] [0] http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_c67-6214 10.pdf
regards, q. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Drew Weaver Sent: 17 August, 2011 11:28 To: cisco-nsp Subject: [c-nsp] A bit of 6513-E confusion With a 6513-E would you be able run it with: 2xSUP720-3BXLs 10xWS-6748(/w DFCs) 1x WS-6708? I don't need the 10/100/1000 ports to be "line rate" either. I know in the regular 6513 you can only put the higher-end cards in the last few slots, but I can't really find out if that is still true on the 6513-E. Has anyone been brave enough to try it and could you share your results? thanks, -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
