holemans -- via 'sh int e<x/y> trans det' one can scrape the dom information from the pluggable, assuming the pluggable supports dom.
regards, q. -= sent via iphone. please excuse spelling, grammar, and brevity =- On Sep 9, 2011, at 2:24, Holemans Wim <[email protected]> wrote: > Recently we started using CWDM coloured 10G SFP+ interfaces (smartoptics) on > our campus network (in 4900M with OneX convertors). This works just fine > although Cisco probably will tell us that is not supported... > I'm wondering if someone already did the same thing on nexus 5xxx switches, > especially 5010 and 5548. We are planning to build a new backbone between > different datacenters based on nexus material (5010 in 2 remote datacenters, > 5548 in the central datacenter). We could use the transponders of our CWDM > vendor and use local SR SFP+ interfaces but these transponders cost about 3x > times more than coloured SFP+ interfaces (and these don't com cheap). Using > coloured SFP+ interfaces moves control/monitoring of the fiber losses to the > end device but we can live with that. > Second question : can you read out fiber losses on a nexus ? (cfr show int > transc in IOS) > > Greetings, > > Wim Holemans > Netwerkdienst Universiteit Antwerpen > Network Services University of Antwerp > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
