There's a low-end hardware from vendors such as D-Link that do egress policing, but not ingress. Ingress is much harder to come by.
Frank -----Original Message----- From: Mark Tinka [mailto:[email protected]] Sent: Sunday, September 11, 2011 8:59 AM To: [email protected]; [email protected] Subject: Re: [c-nsp] Low-cost rate-shaping/policing switch On Sunday, September 11, 2011 11:45:46 AM Frank Bulk wrote: > What is the lowest-cost Cisco *switch* that does > rate-limiting on the egress and policing on the ingress, > on a per-port basis? My guess is that would be the ME3600X/3800X, since it supports egress policing. However, do note that egress policing, which has appeared for the first time on this platform in IOS 15.1(2)EY, is currently limited to policing on egress for Priority traffic/queues. I've already contacted our SE to ensure egress policing is supported for all traffic/queue types, and will wait to see when that happens. I know most classic switches don't support egress policing (some do egress shaping), but I can't be really sure. The same goes for Juniper's EX switches, although they really aren't in the same league as the ME3600X/3800X I'm mentioning here. Would suggest you check with your SE. Cheers, Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
