I see. If this is not platform specific then it's good...I though it's only for 7600... there's no show mls commands in 7200. How do we show the mapping?
thanks --- On Fri, 9/16/11, Tony <[email protected]> wrote: From: Tony <[email protected]> Subject: Re: [c-nsp] 7200 DSCP-to-EXP Mapping To: "[email protected]" <[email protected]>, "ar" <[email protected]> Date: Friday, September 16, 2011, 12:29 PM My understanding is that the 3 bits of the IP precedence field are copied to the EXP as part of the MPLS encapsulation. This is not platform (or even vendor) specific. See archives: https://puck.nether.net/pipermail/cisco-nsp/2007-April/039781.html regards, Tony. --- On Fri, 16/9/11, ar <[email protected]> wrote: > From: ar <[email protected]> > Subject: [c-nsp] 7200 DSCP-to-EXP Mapping > To: "[email protected]" <[email protected]> > Received: Friday, 16 September, 2011, 1:21 PM > anyone aware of the default > DSCP-to-EXP mapping ong 7200 series? > > I know on 7600 mapping is automatic. I am not sure on > 7200. > > thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
