Yes please I was able to use the qos-groups with the 15. code
adam -----Original Message----- From: Oliver Boehmer (oboehmer) [mailto:[email protected]] Sent: Monday, September 19, 2011 2:34 PM To: Vitkovsky, Adam; [email protected] Subject: RE: [c-nsp] 7200 DSCP-to-EXP Mapping Adam, > Speaking of pipe modes :) > > I also failed to use the pipe mode with 12.2.33 SR codes > As I was not able to use the qos-groups to keep track of the EXP value on > the egress PE > So on 7200s I pretty much got stuck with a short pipe mode and "set mpls-exp > imposition" at the ingress PE hmm, not 100% sure, haven't worked on 7200 QoS in a while, but feature navigator doesn't show "MPLS QoS - DiffServ Tunnel Mode Support" on 7200 in 12.2SR train. can you check another release train (for example 15.1S)? oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
