Unless you're required to have the link-rate be 1Gb, you might consider running the interface at 100Mbps and then specify 85% of that for srr-queue bandwidth. I'm not sure about the 3560, but on the 3750 you can specify 'auto 10 100', which will remove 1000Mbps from the advertised link rates during auto negotiation, allowing you to still do auto speed while running the link at 100Mbps.
Andrew Clark _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
