Hi, I'm seeing the following output for " show interface gig x/y switching" ROUTER#sh inter gig x/y switching GigabitEthernet x/y Throttle count 0 Drops RP 0 SP 0 SPD Flushes Fast 0 SSE 0 SPD Aggress Fast 0 SPD Priority Inputs 46670 Drops 0
Protocol Path Pkts In Chars In Pkts Out Chars Out Other Process 1078379 69124236 1 96 Cache misses 0 Fast 0 0 0 0 Auton/SSE 0 0 0 0 IP Process 3594269215 341714357335 162336237 18154131440 Cache misses 0 Fast 395280896627 35724688800466 406469605169 44781968153216 Auton/SSE 1220084333084 240117721335247 1899837692532 1757256129434539 ARP Process 28158607 1689516436 31556627 3029436192 Cache misses 0 Fast 0 0 0 0 Auton/SSE 0 0 0 0 The IP Process and IP Fast are accumulating . The config. of the interface is as follows: ---------------------------------------------- interface GigabitEthernet x/y ip address x.x.x.x x.x.x.x ip verify unicast source reachable-via rx allow-default no ip redirects no ip proxy-arp ip tcp adjust-mss 1400 speed nonegotiate no cdp enable service-policy input POLICY service-policy output POLICY end ------------------------------------------------ Regard, Waseem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
