On 05/10/11 12:15, Waseem wrote:
It is a regular internet traffic to port 80, from our customers, which should
be CEF switched.
Port 80 traffic to where? Can you show some?
There must be something wrong with the traffic or your config for the
7600 to be process switching it. You need to give more details instead
of giving the minimum information in each reply you make.
In your original post, you gave a small config snippet; can you describe
the topology in more detail? Rather than replacing IP addresses with
x.x.x.x can you replace them with corresponding private IPs? Or show the
real config?
I am assuming the traffic is ingressing on the gig interface whose
config you listed; what is the egress interface?
What is the config for the service-policy you list?
What does:
sh int GiX/X
sh ip int GiX/X
sh tcam int GiX/X acl in ip
...say?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
