Right. I have a backup of config on the flash cards in the system. Anytime a change is made it's copied to both flash cards and tftp to the server. The only issue tftp is manual though and sometimes doesn't get done. RANCID from now on. Haven't had time to setup but now it's a must.
rootnet On Sat, Oct 8, 2011 at 2:35 PM, Keegan Holley <[email protected]>wrote: > Do you have a backup of the config? Assuming you're doing all this just to > migrate to a new box why not use the backup config to build the new box or > migrate? If you are going to fix it why not get the new working NPE and use > the backup to rebuild? I'm not sure password hacking the broken one is > worth it anymore. Also, if you boot it it may come back in an even worse > state. > > > 2011/10/8 root net <[email protected]> > >> Hello, >> >> Just want to confirm what should be done. I have a router that resulted in >> a >> bad NPE 225. Had a spare NPE 225 but it wouldn't work for some strange >> reason. So had an old NPE 150 laying around so inserted. When the router >> came backup noticed that a message flashed nvram corrupt on console. All >> circuits came up lovely but now I can't access the router to possibly move >> circuits to different router. >> >> I have the router configured with AAA for local and no backup >> authentication. (Silly) >> >> What should be the steps I take to recover access to router so I can setup >> AAA for local and backup auth? >> >> Thanks, >> >> rootnet08 >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
