I seem to recall that the ASR9K does not support GLC except the 100-FX, so this is less useful. It also means you can't reuse optics from 7600/6500 in ASR9K and are required to repurchase them.
I do wish cisco would unify support for the SFP connector devices across all product lines. The ASR9K does not support auto-neg, you have to manually set the speed on the 40GE card. - Jared On Oct 19, 2011, at 8:01 AM, Yann GAUTERON wrote: > The platforms where GLC-T are supporting 10/100/1000Base-T are listed here: > http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html > > Don't know however if they do support auto-neg or not. > > Y. > > > 2011/10/19 Brett Looney <[email protected]> > >> They do support auto negotiation, just not on all platforms. And in certain >> cases, not in some ports on a platform but they do in other ports on that >> same platform. And try finding that information (i.e. what is supported >> when >> for that particular SFP) in a single document. >> >> Not helping, I know. Channelling Gert. >> >> B. >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
