On 19.10.2011 2:27 PM, Jared Mauch wrote:
> The ASR9K does not support auto-neg, you have to manually set the speed on
> the 40GE card.
This is true for the line-cards out now. Newer line-cards should
support auto-neg.
On 19.10.2011 10:35 AM, Phil Mayers wrote:
> In providing assistance for a couple of other sites connected to that
> same router, it's been mentioned that the tri-rate copper SFPs don't
> support autoneg?
We have some of this SFPs, if tried in the Lab, you have to set the
speed manually.
Cheers,
Tim
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
