Surely if you have a number of dhcp servers theres a layer3 switch or router in the network that you can use to route between pc and servers
Sent from my iPhone On 03/11/2011, at 1:11 PM, "Thomason, Simon" <[email protected]> wrote: > You could use EEM and tcl scripts to do this. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Mohammad Khalil > Sent: Thursday, 3 November 2011 4:15 AM > To: [email protected] > Subject: [c-nsp] Changing VLANs > > > Hi all , i have a layer 2 switch , i want to connect a PC to a port and > number of DHCP servers to other ports > i want to the PC to communicate with each server every 5 minutes > for example PC is connected to F0/1 and Server 1 is connected to F0/2 , after > 5 minutes i want the port the PC connecting to to change its VLAN in order to > communicate with Server 2 which is connected to port F0/3 (which is on > different VLAN) > > Thanks > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > Show Your RACQ Card & Save during November and save 20% at Repco. For more > info visit: www.racq.com/repco > > Please Note: If you are not the intended recipient, please delete this email > as its use is prohibited. RACQ does not warrant or represent that this email > is free from viruses or defects. If you do not wish to receive any further > commercial electronic messages from RACQ please e-mail > [email protected] or contact RACQ on 13 19 05. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
