I'm pretty sure the peer link was up when i configured this. I tried shut/no shut now, and it removed adminCfgChange but now it's in Administratively shutdown.
I'd like to note that this happened on two ports now, i tried to move them after this occurred, but the result was the same. I could get a TAC case on this, but i would like to exhaust any other options first. Here is the output you wanted. server-sw5(config-sync)# show system internal mts buffers details Node/Sap/queue Age(ms) SrcNode SrcSAP DstNode DstSAP OPC MsgId MsgSize sup/284/pers 407839 0x101 24170 0x101 284 86017 165036834 868 sup/284/pers 8640 0x101 23943 0x101 284 86017 165111292 868 sup/284/pers 597 0x101 24168 0x101 284 86017 165117208 868 sup/284/pers 339 0x101 24157 0x101 284 86017 165117243 868 sup/284/pers 160 0x101 24156 0x101 284 86017 165117265 868 sup/284/pers 60 0x101 23939 0x101 284 86017 165117267 868 sup/284/pers 50 0x101 23904 0x101 284 86017 165117273 868 sup/284/pers 31 0x101 14898 0x101 284 86017 165117284 868 Best Regards -- Erlend Røsok ----- Original Message ----- Fra: "John Gill" <[email protected]> Til: [email protected] Kopi: [email protected] Sendt: 4. november 2011 15:36:55 Emne: Re: [c-nsp] Interface is down (adminCfgChange) in N5K Erlend, This is buggy behavior, you may be able to get the port back up with a shut/no shut. I don't see an exact match in known bugs, but do you have the ability to file a TAC case? If not, I can still help by gathering some debugs with you. Were you doing this configuration while the peer-link was down or initializing? Can you check the mts message queue? show system internal mts buffers detail Regards, John Gill cisco On 11/4/11 7:07 AM, Erlend Røsok wrote: > > I'm trying to bring up two interfaces under config sync mode in a redundant > N5K system running version 5.0(3)N2(2). > > The FEX modules have one uplink to each of the N5K. > > > 1) I first try to configure using a port-profile. > > This brings it in Administratively down state for some reason. So i try to no > shut the interfaces under config sync, but it does not take effect. > > 2) I then try to remove everything and configure it without a port-profile. > > This brings the interfaces in (adminCfgChange) state. I've tried to google > this, but it hasn't given me much information. > > > I have the configuration in a pastebin here: > http://pastebin.mozilla.org/1373542 > > > Any help would be appreciated. > > > Best Regards > > -- > Erlend Røsok > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
