Christian, I suspect it may be built in default control plane policers kicking in to protect the CPU. Let me confirm this and will get back to you.
-Waris -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Christian Meutes Sent: Saturday, November 26, 2011 11:44 PM To: [email protected] Subject: [c-nsp] Strange Packetloss on ME3600X Hi list, ME3600X-1----(mpls/isis)----ME3600X-2----(mpls/isis)----ME3600X-3 When pinging from X-1 to X-3 with ... - source set to loopback - DF set - packet size is between (MTU - 4Byte) and (MTU - 7Byte) - repeat count > 75 ... then one out of 75 pings is lost. I'am not quite sure where the loss occurs as "debug mpls packet process" is only working when the packet size is smaller than (MTU - 7Byte) - which reveals another strange behavior. Can anyone confirm this or knows a reason why this happens? regards Christian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
