On Monday, November 28, 2011 10:09:43 PM Christian Meutes wrote: > - the source of the pings *must* be a loopback > - the packet size must be between 4 and 7 Byte less than > the configured MTU > - there needs to be another ME3600X acting as LSR between > the ping source and ping destination (A-B-C) > - it's only dropping 1 out of 70 pings approximately, and > it varies.
I've recreated this scenario in one of our rings and didn't hit it. I send 1,000 packets with MTU - 4 bytes or MTU - 7 bytes, with the Loopback interface as the source, all looks good. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
