Hi, On Fri, Dec 02, 2011 at 10:15:09PM -0500, Jeff Kell wrote: > Is it possible to run an RSPAN vlan through (not an endpoint, just > transport) an intermediate switch (specifically Foundry/Brocade FCX switch)?
No...
> I would suspect that mac address learning on the switch would
> "interfere" with RSPAN,
... because of that. If you SPAN only TX or RX, it might work (because
the intermediate switch would not see = not learn the destination MAC
address then), but if you SPAN TX+RX, you'll see a few packets and
then nothing more.
> and I can't find a Brocade equivalent of the
> "mac-learn <interface> disable".
Can't say anything on that.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpNYptn43z5I.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
