On 12/03/2011 03:15 AM, Jeff Kell wrote:
Is it possible to run an RSPAN vlan through (not an endpoint, just
transport) an intermediate switch (specifically Foundry/Brocade FCX switch)?
I would suspect that mac address learning on the switch would
"interfere" with RSPAN, and I can't find a Brocade equivalent of the
"mac-learn<interface> disable".
Quite a few vendors provide a knob to disable learning on a vlan for
this and similar purposed - Cisco provide "remote-span", for example.
So, it's possible if you can disable learning. If you can't, then no.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
