Henrry, MBGP for multicast would solve the issue... you can establish a mBGP session between R1 and R2 (using iBGP with IP wan interfaces) advertise the source and destination in the multicast address family after that you can change BGP attributes in order to handle the downstream traffic (I suppose that R1 is the closest router to the source).
Rgds. On Mon, Dec 5, 2011 at 9:12 PM, henrry huaman <[email protected]> wrote: > Hi Guys, > We have the next scenary: > > R1- e0/0---------------e0/0- R2 > \ e0/1---------------e0/1--/ > > And, we want to have differents groups multicast passing by its own path. > > Is possible to configure any feature "PBR" with multicast? > > R1 e0/0 ------- only group 239.32.32.32-------- e0/0 R2 > R1 e0/1 ------- only group 239.33.33.33--------e0/1 R2 > > Thanks. > > > > Henry > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
