Hi, I have a cisco 1841 on my network and though working ok has this messages.
It is connected to a gigabit switch and the ports set to 100Mbps. What would this mean and how do I clear them? : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up Config global - ip cef is enabled interface FastEthernet0/0 ip address x.x.x.x y.y.y.y ip ospf message-digest-key zzzzzzzzzzzz ip ospf priority 0 duplex auto speed auto no cdp enable max-reserved-bandwidth 100 ! interface FastEthernet0/1 (connected and supporting dot1q interfaces) no ip address duplex auto speed auto Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
