I take it you also have the associated down messages as well? If you are having interface drops then I would look into that rather than just ignoring it.
Do you get drops on the device that is on the other end of these connections? David Rothera On Thu, Dec 8, 2011 at 9:17 AM, Wakwa Nduati <[email protected]> wrote: > Hi, > > I have a cisco 1841 on my network and though working ok has this messages. > > It is connected to a gigabit switch and the ports set to 100Mbps. > > What would this mean and how do I clear them? > > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > : %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up > > Config > > global - ip cef is enabled > > interface FastEthernet0/0 > ip address x.x.x.x y.y.y.y > ip ospf message-digest-key zzzzzzzzzzzz > ip ospf priority 0 > duplex auto > speed auto > no cdp enable > max-reserved-bandwidth 100 > ! > interface FastEthernet0/1 (connected and supporting dot1q interfaces) > no ip address > duplex auto > speed auto > > Thanks. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
